motorcycle clothing parts motorcycle accessories for sale @ Atlantic Moto USA

KBC MOTORCYCLE HELMETS SIZING GUIDE
KBC MOTORCYCLE HELMETS ARE APPROVED TO THE WORLD'S HIGHEST SAFETY STANDARDS INCLUDING: SNELL AND DOT IN NORTH AMERICA AND ALSO AVAILABLE IN ECE AND QAS.

KBC MOTORCYCLE HELMETS SIZING
HOW TO FIT KBC MOTORCYCLE HELMETS AND RETENTION SYSTEMS:
The best way to put on the KBC motorcycle helmets is to hold the chin straps to each side before pulling it over your head. Pass the end of the strap through the D-rings and pull it snug. Keeping your head straight, rotate the KBC motorcycle helmets from side to side with your hands. If the KBC motorcycle helmets are adjusted properly, you should feel the movement of your scalp closely match the KBC motorcycle helmets's movement. With your hands on the sides of the KBC motorcycle helmets, move the KBC motorcycle helmets in a slight up and down motion. Once again, the movement of your skin should follow the KBC motorcycle helmets movement. To remove the KBC motorcycle helmets, pull the D-ring tab outward to release strap tension, then unthread the chin strap. Pull the chin straps outward, rotate the KBC motorcycle helmets forward and lift it off.

PLEASE NOTE:
A. No KBC motorcycle helmets can protect the user against all foreseeable impacts.
B. For maximum protection, the KBC motorcycle helmets must provide adequate peripheral vision.
C. All retention straps (chin straps) must be securely fastened.
D. The KBC motorcycle helmets can be seriously damaged by some common substances with damage being invisible to the user. Apply only mild soap and water for cleaning.
E. Make no modifications to the KBC motorcycle helmets. If the KBC motorcycle helmets experiences a severe blow, please replace it.


KBC MOTORCYCLE HELMETS APPROXIMATE SIZING CHART

IMPORTANT INFORMATION WARNING:
KBC MOTORCYCLE HELMETS MUST FIT SECURELY. THE WEARER SHOULD ENSURE ADEQUATE PERIPHERAL VISION. THE CHIN STRAP MUST BE SECURELY FASTENED. IF THE KBC MOTORCYCLE HELMET IS NOT WORN OR CARED FOR AS DESCRIBED IN THIS INFORMATION SECTION, THE USER COULD BE VULNERABLE TO SERIOUS INJURY, INCLUDING HEAD INJURY. NO HELMET CAN PROTECT THE USER FROM ALL FORESEEABLE IMPACTS.
Motorcycle riding for sport or pleasure is dangerous. Wear approved KBC motorcycle helmets at ALL times while riding.

INTRODUCTION:
KBC motorcycle helmets are technologically advanced products that are made only for use while riding a motorcycle. KBC motorcycle helmets can not guarantee the same level of safety for a different use. In an accident, no KBC motorcycle helmets can eliminate the risk of serious or even fatal injuries

Legally approved KBC motorcycle helmets must be worn at all times to maximize the protection available in any given impact.

1. For adequate protection, KBC motorcycle helmets must fit snugly and provide an exact and comfortable fit.
2. KBC motorcycle helmets are made to absorb some of the energy of an impact or blow by partial destruction of its component parts (e.g.- external shell and inner liner) and even though damage may not be apparent, KBC motorcycle helmets should be replaced after any impact whatsoever.
3. To maintain the full efficiency of KBC motorcycle helmets, there must be no alteration to the structure of KBC motorcycle helmets or their components.
4. The chin strap must pass underneath the jaw, and must be securely fastened to maintain tension at all times while the KBC motorcycle helmets are in use. The law requires that the KBC motorcycle helmets must be securely fastened to the head. DO NOT USE A CHIN CUP with KBC motorcycle helmets.
5. The protection given by KBC motorcycle helmets may be severely reduced by the application of paint, adhesive stickers and transfers, cleaning fluids, and/or other solvents. Only use materials recommended by KBC motorcycle helmets manufacturer. For more information, see the General Care and Cleaning section.
6. Full face KBC motorcycle helmets are designed for use with a shield, and is not suitable with any type of goggles. Use goggles only with off road (Motocross) type KBC motorcycle helmets.

SIZING FIT AND POSITION

SIZING:
In order to be safe, you must select your KBC motorcycle helmets in a size which fits your head correctly. This means the KBC motorcycle helmets must fit snugly (tightly but comfortably), making contact with most parts of your head. If it is too large, it will move around excessively on your head. If it is too small it will cause constriction and discomfort, which could lead to headaches or a lack of concentration while riding. To test the sizing, put the KBC motorcycle helmets on and shake your head to left and right. Then shake your head forward and backward. If it slips easily in any direction, the size is not the correct one for you. Try to turn the KBC motorcycle helmets with your hands. With the KBC motorcycle helmets on, rotate the KBC motorcycle helmets from side to side, observing the movement of your skin in relation to the KBC motorcycle helmets. KBC motorcycle helmets fitting is correct when skin movement and KBC motorcycle helmets movement is nearly the same. For proper sizing of your new KBC motorcycle helmets, please consult an authorized KBC dealer.

CAUTION:

Correct Positioning:
Do not put on the KBC motorcycle helmets and fasten the buckle when your KBC motorcycle helmets are hanging on the back of your head. Remember to always wear the KBC motorcycle helmets in the correct position.

IMPORTANT FITTING ROTATIONAL TEST:
THE MOST IMPORTANT TEST IS TO ENSURE THAT THE KBC MOTORCYCLE HELMETS REMAINS ON THE HEAD IN THE EVENT OF AN IMPACT. TO PERFORM THIS TEST, FIRST FIT THE KBC MOTORCYCLE HELMETS CORRECTLY AND FASTEN THE STRAP SNUGLY. THEN USING YOUR HANDS, ATTEMPT TO LIFT FROM THE REAR OF THE NECK AREA AND TRY TO ROLL THE KBC MOTORCYCLE HELMETS OFF OF YOUR HEAD. MAKE SURE THIS CANNOT BE ACHIEVED AND THAT THE KBC MOTORCYCLE HELMETS REMAIN TIGHTLY FIXED TO YOUR HEAD AND THAT THE STRAP PREVENTS THE HELMET FROM COMING OFF OF YOUR HEAD.